Automatic Sewage Pump w/ Float Switch, 10' cord, 1/2 HP, 115V

Description

Overview:
The Liberty Pump LE51A
is an automatic submersible sewage pump with a 1/2, 115V motor and a 10' quick-disconnect power cord. This Liberty sewage pump is capable of reaching a max flow of 112GPM at 25' total dynamic head. This sewage pump is also equipped with an adjustable wide-angle switch that has a series (piggyback) plug for manual bypass operation. In the event of switch failure, the submersible sewage pump cord can be separated and plugged into the electrical outlet, directly bypassing the switch. The turn-on level for this submersible sewage pump is approximately 12" to 16" above the bottom of the basin. The turn off level is approximately 6" above the bottom of the basin.
The Liberty Pump a discharge of 2" FNPT and features a 2-vane semi open impeller that can handle solids up to 2". The Liberty sewage pump motor is oil filled and thermally protected. The rotor shaft is made of 416-stainless steel and is supported by lower and upper ball bearings.
Features:
Heavy cast iron construction
Oil filled, thermally protected motor
Permanently lubricated bearings
2-vane, corrosion resistant HYTREL impeller
All stainless steel fasteners and rotor shaft
Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor
Technical Specifications:
Horsepower: 1/2HP
Cord length: 10'
Discharge: 2" FNPT
Solids Handling: up to 2"
Shut-off Head: 25'
Voltage: 115V
Amps: 12
Hertz: 60 Hz
Phase: 1
Maximum fluid temperature: 140°F
Height: 14"
Width: 11.75"
Weight: 42 lbs.
Minimum basin diameter: 18"
Minimum basin depth: 24"