KROHN-HITE 4200A-5 10 Hz to 10 MHz 75 & 600 Ohm OSCILLATOR **LOOK** (REF.: 435G)

Description

SHIPPING COSTS ARE IN NO WAY INCLUDED IN THE PURCHASE PRICE.
WE SHIP TO CANADA, USA AND MANY OTHER COUNTRIES
We encourage you to read THE FOLLOWING !!!
Please ask us for a shipping quote if you are interested in this item since the displayed shipping cost is an indication and is not accurate. We are obliged by Ebay to indicate a flat rate to list on Ebay.com since we are in Canada
There may be customs and/or customs brokerage charges. These charges are not included in the shipping costs and might be requested at delivery.
Taxes need to be added to Canadian Buyers !!!
PAYMENT MUST BE RECEIVED WITHIN 3 DAYS OF AUCTION ENDING
KROHN-HITE 4200A-5
10 Hz to 10 MHz 75 Ohm & 600 Ohm Oscillator
UNIT IS IN WORKING CONDITION. CONTROLS MIGHT NEED SOME CLEANING AS THIS UNIT HAS A FEW YEARS BEHIND IT.
KROHN-HITE 4200A-5
FEATURES
;
The
Krohn-Hite 4200A-5
is an all solid state, general purpose Test Oscillator that provides a main sine wave and an auxiliary sine wave from 10 Hz to 10 MHz. The main sine wave output is variable from 0 to 10 volts rms open-circuit or 5 volts rms across 50 ohms. Max power output is 1/2 watt with less than 0.1% harmonic distortion. The auxiliary output is a sine wave fixed at 1 volt rms open circuit, and coincident with the main output.
Reach out to Select-Test.com for further assistance. This oscillator has 10 volt amplitude which is a good feature not available on many lower end oscillators.A fixed 1 V output independent of the main output can be used for synchronizing a scope or as an auxiliary output. An infinite resolution dial and push-button multiplier provides rapid and continuous frequency tuning. Amplitude calibration of .2 dB accuracy is obtained by an 8 position push-button attenuator calibrated in 10 dB steps. A continuous output control combined with the attenuator provides 90 dB of attenuation.
-5 (4200A-
5
) Modifies the main output from 50 ohm to 75 ohm and the second output from 1V Squarewave to 600 ohm Sinewave.
·
Frequency Range: 10 Hz to 10 MHz Continuously Variable
·
Frequency Response: Within ±0.25 dB from 10 Hz to 500 kHz rising to ±0.5 dB at 10 MHz into a matched 50 ohm load.
·
Eight position pushbutton attenuator calibrated in open circuit voltage and 10 dB steps from +20 to -50 dB plus an infinite resolution vernier calibrated in RMS volts from 0 to 3.16 and 0 to 10
·
Attenuator Accuracy: ±0.2dB
·
Auxiliary Output: Voltage - Fixed at 1 Vrms open circuit Impedance - 600 ohms DC Component - Zero
·
Terminals: Front Panel - BNC for Main Output Aux Ouput Rear Panel - BCN for External Sync.
PLEASE HAVE A LOOK AT THE OTHER LISTED ITEMS WE HAVE AVAILABLE ON  EBAY BY
CLICKING HERE
LOOK AT PICTURES!!!
WHAT YOU SEE IN THE PICTURE IS WHAT YOU WILL OBTAIN
UNITS MAY NOT BE CALIBRATED AND / OR MAY NOT HAVE RECENT CALIBRATION UNLESS NOTED.
BUYERS IN CANADA WILL BE SUBJECT TO GST AND PST DEPENDING ON THE PROVINCE
RESTRICTIONS ON SHIPPING APPLY TO INDONESIA, NIGERIA, IRAN, NORTH KOREA, IRAQ & AFGHANISTAN AT THIS TIME.
PLEASE NOTE WE CAN SHIP VIA YOUR CHOICE OF COURRIERS.
DO NOT BASE YOURSELF ON THE EBAY SHIPPING COST. IT USUALLY DOESN'T REFLECT REALITY.
DO NOT SEND MONEY UNTIL WE HAVE PROCEEDED TO CHECK OUT AND HAVE CALCULATED SHIPPING OURSELVES
THERE IS A .00 PACKAGING CHARGE ON ANY ITEM BEING SOLD FOR LESS THAN 0
You can use the following dimensions to get an idea of the shipping costs;
BOX SIZE
18 INCHES X 18 INCHES X 13 INCHES
Weight = 21 lbs
Unit to be shipped from Postal Code (equivalent of Zip Code): H1E 5Y8