NEVA-CLOG 316 stainless screen mesh strainer for Separators or Vacuum Filters

Description

This material was used for making high-purity-gas diffusers for evaporative drying chambers. This piece was never used, but was bent in thirds for easier handling and storage.
NEVA-CLOG material is made of two thin sheets of 316 SS, welded together with a very small air gap in between. Each sheet contain thousands of tiny holes. The air gap betweeen the sheets (a few microns) excludes large particles and resists clogging (hence "neva-clog"). This material is ideal for many filtration and separation requirements. Each of the 2 sheet which comprise it are very thin, allowing it to be cut to any size using regular aviation snips (it behaves like any sheet metal - curves are hard).
The sheet has 2 large straight lengths (between folds/bends) of 36x24".  The folded sheet also has 2 narrower lengths 16x36" and 8x36". In addition to the folded full-sized (6'L) piece, there are 3 smaller strips available (buyer may choose to let me recycle them instead).